CARR LOCK® SYSTEM
CARR LOCK® SYSTEM2
CARR LOCK® SYSTEM3
CARR LOCK® SYSTEM4

CARR LOCK® SYSTEM (Carr Lock® Clamp)

0 out of 5

Price range: $85.09 through $91.72

The Carr Lock® System allows accurately locating and clamping at the same time, with just the turn of a hex wrench. Ideal for mounting quick-change tooling on a subplate. Each mount consists of three components: (1) a Carr Lock® Clamp with a precisely ground shank; (2) a Liner Bushing in the top plate; (3) a Receiver Bushing in the subplate. This compact assembly provides considerable holddown force, together with an incredible ±.0005 inches repeatability! Each top plate should have one Carr Lock® Clamp designated as its primary reference point, and one as its secondary reference point. These two clamps should be as far apart as possible. The secondary reference point should have a relieved liner to avoid redundant location (binding). Additional Carr Lock® Clamps can be used for more clamping force, but these should be installed in clearance holes, not locating liners. Note that the same Carr Lock® Clamp fits any type of liner or a clearance hole. Carr Lock® Clamps must be used with one of the Receiver Bushings (INFO+) on page 356. Plate thickness must be ±.005 inches to
achieve proper clamping force. Special grip lengths for other plate thicknesses are available as specials. Do not exceed maximum screw torque shown.

SKU: N/A
Clear
Add to wishlist

Description

The Carr Lock® System allows accurately locating and clamping at the same time, with just the turn of a hex wrench. Ideal for mounting quick-change tooling on a subplate. Each mount consists of three components: (1) a Carr Lock® Clamp with a precisely ground shank; (2) a Liner Bushing in the top plate; (3) a Receiver Bushing in the subplate. This compact assembly provides considerable holddown force, together with an incredible ±.0005 inches repeatability! Each top plate should have one Carr Lock® Clamp designated as its primary reference point, and one as its secondary reference point. These two clamps should be as far apart as possible. The secondary reference point should have a relieved liner to avoid redundant location (binding). Additional Carr Lock® Clamps can be used for more clamping force, but these should be installed in clearance holes, not locating liners. Note that the same Carr Lock® Clamp fits any type of liner or a clearance hole. Carr Lock® Clamps must be used with one of the Receiver Bushings (INFO+) on page 356. Plate thickness must be ±.005 inches to
achieve proper clamping force. Special grip lengths for other plate thicknesses are available as specials. Do not exceed maximum screw torque shown.

Additional information

SKU

CL-13-CLC-0.50, CL-13-CLC-0.7, CL-16-CLC-0.50, CL-16-CLC-0.75, CL-20-CLC-0.75

Related Products